Stainless steel work cabinet with upstand, drawer block on the left, doors and height-adjustable intermediate shelf | Depth 600mm | AISI 304 | WxDxH: 2300x600x850

Work cabinet with sliding doors, intermediate shelf and drawer block on the left Up to 1,300 mm with hinged doors FROM 1,400 mm with double-walled sliding door Height: 850 mm + 35 mm Installation depth 600 mm Frame braced on three sides and welded Worktop 40mm thick, backed with chipboard (19mm) and coated on both sides Brushed surface of the sheets Sheet thickness: 1.0 mm Made of stainless steel AISI 304 (V2A) Feet made of 40 x 40 mm square tube, 1.2mm wall thickness Feet height-adjustable With 4 feet, from 2,200 mm with 6 feet With upstand height-adjustable intermediate shelf All special sizes on request

Product features

Made of stainless steel AISI 304 (V2A) Brushed steel Frame braced on three sides and welded Tabletop 40mm thick Tabletop backed with chipboard (19mm) Tabletop coated on both sides With 4 feet, from 2,200 mm with 6 feet Height-adjustable via feet With upstand With sliding doors (up to 1,300mm with hinged doors) With height-adjustable intermediate shelf With drawer block

Technical data

Manufacturer	A&S Gastro
Article number	ARSASBL236
EAN	4061794508994
Dimensions W x D x H (mm)	2300x600x850
Width (mm)	2300
Depth (mm)	600
Height (mm)	850
Material	AISI 304
Worktop material	AISI 304
Net weight (kg)	104
Gross weight (kg)	106
Number of doors	2
Type of doors	Sliding doors
Upstand	with upstand
Delivery time	7-14 working days
Shipping method	Freight forwarding
Country of origin	Germany

Product safety

Responsible person (EU): A&S Gastro GmbH & Co. KG, Möhnestr. 139a, 59755 Arnsberg, info@aundsgastro.de

Safety instructions:

• Make sure the appliance stands on a stable, horizontal, level, heat-resistant and non-slip surface
• Before first use, remove all protective films and clean the appliance carefully
• The appliance must not be operated or adjusted by unauthorised persons (e.g. children)
• Please note that the appliance must never be cleaned with a jet of water or immersed in liquids; there is an acute risk of electric shock and short circuit. The appliance must also be switched off and disconnected from the mains before cleaning/maintenance
• When not in use, the appliance must be switched off and disconnected from the mains
• Damaged cables or plugs must not be used. These parts may only be replaced by qualified specialist personnel.
• Extension cables, adapters or multi-socket strips must not be used, as this can lead to overheating. There is an acute risk of fire
• In the event of a power failure or disconnection from the mains, wait at least 5 minutes before switching the appliance back on to avoid damage Refrigeration appliances
• After transport or when the appliance is moved, it must be left switched off for 24 hours before it may be switched on
• Make sure that sufficient air can be supplied to the appliance by keeping ventilation grilles and openings clear so that enough air can circulate
• The appliance must not be placed in the immediate vicinity of heat sources. Likewise, the appliance must not be located in damp rooms or in direct sunlight
• Ice cube machines are intended exclusively for making ice cubes. Other uses may cause damage and affect the warranty.
• The refrigerant used is a flammable and explosive gas. If the refrigerant circuit is damaged, the room must be well ventilated and open flames avoided.
• To prevent a flammable gas-air mixture from forming due to a leaking refrigeration circuit, the size of the room in which the appliance is installed depends on the amount of refrigerant used. The refrigerant quantity of your appliance is stated on the rating plate inside the housing.
• Do not place corrosive acids or alkalis in the appliance. Thermik
• The appliance must never be positioned near flammable materials or heat sources.
• A safety distance of at least 20 cm on all sides must be maintained.
• Only use the appliance with an earthed power connection and check the power cable regularly for damage.
• The appliance is not suitable for outdoor use or use in the rain.
• Surfaces can become hot during operation – use protective measures such as gloves.
• In the event of fire, never use water, but suitable extinguishing agents (e.g. C14)