Work cabinet with drawer block left & right | WxDxH: 2400x600x850 without upstand

Work cabinet with drawer block left & right Depth 600 mm Stainless steel AISI 304 without upstand Welded frame with drawer block on the left for GN 1/1, height: 150 mm Worktop (40 mm) with sound-dampening underlay Height-adjustable feet 40 x 40 mm square tube Height: 850 mm with height-adjustable intermediate shelf All special sizes on request From 2,800 mm with 8 feet

Product features

WxDxH: 2400x600x850 mm AISI 304 without upstand Welded frame with drawer block left and right for GN 1/1, height: 150 mm Worktop (40 mm) with sound-dampening underlay Height-adjustable feet 40 x 40 mm square tube Height: 850 mm with height-adjustable intermediate shelf All special sizes on request From 2,800 mm with 8 feet

Technical data

Manufacturer	A&S Gastro
Article number	ARSSLR246
EAN	4262467765601
Dimensions W x D x H (mm)	2400x600x850
Width (mm)	2400
Depth (mm)	600
Height (mm)	850
Material	AISI 304
Worktop material	AISI 304
Number of doors	2
Number of drawers	6
Upstand	without upstand
Delivery time	7-14 working days
Shipping method	Freight forwarding
Country of origin	Germany

Product safety

Responsible person (EU): A&S Gastro GmbH & Co. KG, Möhnestr. 139a, 59755 Arnsberg, info@aundsgastro.de

Safety instructions:

• Make sure the appliance stands on a stable, horizontal, level, heat-resistant and non-slip surface
• Before first use, remove all protective films and clean the appliance carefully
• The appliance must not be operated or adjusted by unauthorised persons (e.g. children)
• Please note that the appliance must never be cleaned with a jet of water or immersed in liquids; there is an acute risk of electric shock and short circuit. The appliance must also be switched off and disconnected from the mains before cleaning/maintenance
• When not in use, the appliance must be switched off and disconnected from the mains
• Damaged cables or plugs must not be used. These parts may only be replaced by qualified specialist personnel.
• Extension cables, adapters or multi-socket strips must not be used, as this can lead to overheating. There is an acute risk of fire
• In the event of a power failure or disconnection from the mains, wait at least 5 minutes before switching the appliance back on to avoid damage Refrigeration appliances
• After transport or when the appliance is moved, it must be left switched off for 24 hours before it may be switched on
• Make sure that sufficient air can be supplied to the appliance by keeping ventilation grilles and openings clear so that enough air can circulate
• The appliance must not be placed in the immediate vicinity of heat sources. Likewise, the appliance must not be located in damp rooms or in direct sunlight
• Ice cube machines are intended exclusively for making ice cubes. Other uses may cause damage and affect the warranty.
• The refrigerant used is a flammable and explosive gas. If the refrigerant circuit is damaged, the room must be well ventilated and open flames avoided.
• To prevent a flammable gas-air mixture from forming due to a leaking refrigeration circuit, the size of the room in which the appliance is installed depends on the amount of refrigerant used. The refrigerant quantity of your appliance is stated on the rating plate inside the housing.
• Do not place corrosive acids or alkalis in the appliance. Thermik
• The appliance must never be positioned near flammable materials or heat sources.
• A safety distance of at least 20 cm on all sides must be maintained.
• Only use the appliance with an earthed power connection and check the power cable regularly for damage.
• The appliance is not suitable for outdoor use or use in the rain.
• Surfaces can become hot during operation – use protective measures such as gloves.
• In the event of fire, never use water, but suitable extinguishing agents (e.g. C14)