Spiral dough mixer for 42 kg | 400 Volt | Volume: 48 litres | 480x805x850mm

• Spiral dough mixer - dough mixer for 42 kg - Dimensions: 480x805x850 mm - Packaging dimensions: 550x840x900 mm - Power: 400 volts - Power at speed 1: 1.5 kW / 2 hp - Power at speed 2: 1.5 - 2.2 kW / 2 hp - Net weight: 98 kg - Gross weight: 109 kg - Capacity: 48 litres - Dough / hour: 128 kg - Bowl, spiral, central kneading hook and safety guard are made of stainless steel - Bowl diameter: 45 cm - Oil-bath gear motor in the gear system - Equipped with dough hook - Fixed head and bowl - max. operating noise level: < 80 dB(A) - With three-phase motor - Timer as standard - 4 swivel castors, 2 of them with locking brake - On request with 2-speed three-phase motor - Motor with 60 Hz frequency available

Product features

Bowl, spiral, central dough hook and safety guard are made of stainless steel Particularly quiet thanks to reduction gear in oil bath Fixed head and bowl With three-phase motor Special spiral shape enables perfectly mixed dough to be produced in a few minutes

Technical data

Manufacturer	Prismafood
Article number	T50XL
EAN	4262494984099
Dimensions W x D x H (mm)	480x805x850
Width (mm)	480
Depth (mm)	805
Height (mm)	850
Net capacity (L)	48
Gross capacity (L)	48
Colour	White, stainless steel
Material	Stainless steel
Floor material	Stainless steel
Control	manual
Electrical connection	400 Volt
Voltage (V)	400
Power (kW)	1,5 - 2,2
Net weight (kg)	98
Gross weight (kg)	109
Packaging dimensions W x D x H (mm)	550x840x900
Installation type	Freestanding unit
Number of baskets	1
Basket dimensions	42 kg
Number of cooking zones	1
Energy type	Electric
Number of grids/shelves	1
Number of basins	1
Basin capacity	42 kg / 48 litres
Scope of delivery	1 piece(s)
Delivery time	1-5 working days
Shipping method	Freight forwarding
Country of origin	Europe

Product safety

Responsible person (EU): „PRISMAFOOD“ Prismafood, OD Srl, Via Tabina 18 - 33098 Valvasone PN, Italy, info@prismafood.com,

Safety instructions:

• Make sure the appliance stands on a stable, horizontal, level, heat-resistant and non-slip surface
• Before first use, remove all protective films and clean the appliance carefully
• The appliance must not be operated or adjusted by unauthorised persons (e.g. children)
• Please note that the appliance must never be cleaned with a jet of water or immersed in liquids; there is an acute risk of electric shock and short circuit. The appliance must also be switched off and disconnected from the mains before cleaning/maintenance
• When not in use, the appliance must be switched off and disconnected from the mains
• Damaged cables or plugs must not be used. These parts may only be replaced by qualified specialist personnel.
• Extension cables, adapters or multi-socket strips must not be used, as this can lead to overheating. There is an acute risk of fire
• In the event of a power failure or disconnection from the mains, wait at least 5 minutes before switching the appliance back on to avoid damage Refrigeration appliances
• After transport or when the appliance is moved, it must be left switched off for 24 hours before it may be switched on
• Make sure that sufficient air can be supplied to the appliance by keeping ventilation grilles and openings clear so that enough air can circulate
• The appliance must not be placed in the immediate vicinity of heat sources. Likewise, the appliance must not be located in damp rooms or in direct sunlight
• Ice cube machines are intended exclusively for making ice cubes. Other uses may cause damage and affect the warranty.
• The refrigerant used is a flammable and explosive gas. If the refrigerant circuit is damaged, the room must be well ventilated and open flames avoided.
• To prevent a flammable gas-air mixture from forming due to a leaking refrigeration circuit, the size of the room in which the appliance is installed depends on the amount of refrigerant used. The refrigerant quantity of your appliance is stated on the rating plate inside the housing.
• Do not place corrosive acids or alkalis in the appliance. Thermik
• The appliance must never be positioned near flammable materials or heat sources.
• A safety distance of at least 20 cm on all sides must be maintained.
• Only use the appliance with an earthed power connection and check the power cable regularly for damage.
• The appliance is not suitable for outdoor use or use in the rain.
• Surfaces can become hot during operation – use protective measures such as gloves.
• In the event of fire, never use water, but suitable extinguishing agents (e.g. C14)