Wall hood with motor and controller | Stainless steel | Neon lighting | Filter: 2 | 1200x1100x450 mm

External dimensions: 1200 x 1100 x 450 mm

Filter: 2

Filter dimensions: 500 x 400 mm

Motor power: 184 W

Sloped wall hoods

Material: Stainless steel AISI 430

spot-welded

divided into collection and extraction chamber

Row of removable type-B flame-retardant filters

built-in fan, double-sided intake

Control via button control panel

Surface-mounted lighting, wired

all-round grease collection channel

including grease drain tap

ready-to-connect surface-mounted lighting 230 V

Prepared for wall mounting

Product features

Material: Stainless steel | With motor and controller | Surface-mounted lighting, wired | With double-sided intake fan | All-round grease collection channel

Technical data

Manufacturer	Inoxair
Article number	WMRI120110
EAN	4262572813372
Dimensions W x D x H (mm)	1200x1100x450
Width (mm)	1200
Depth (mm)	1100
Height (mm)	450
Colour	silver
Material	Stainless steel
Interior material	Stainless steel
Control	electric
Electrical connection	230V/50Hz
Voltage (V)	230
Power (kW)	0.18
Net weight (kg)	52
Gross weight (kg)	58
Packaging dimensions W x D x H (mm)	1300x1200x450
Number of filters	2
Filter size	500x400 mm
Flame-retardant filter	B
Flame-retardant filter included	yes
Scope of delivery	1 piece(s)
Delivery time	5-7 working days
Shipping method	Freight forwarding
Country of origin	Germany

Product safety

Responsible person (EU): InoxAir GmbH, Alfred-Zingler-Strasse 36, 45881 Gelsenkirchen, info@inoxair.de

Safety instructions:

• Make sure the appliance stands on a stable, horizontal, level, heat-resistant and non-slip surface
• Before first use, remove all protective films and clean the appliance carefully
• The appliance must not be operated or adjusted by unauthorised persons (e.g. children)
• Please note that the appliance must never be cleaned with a jet of water or immersed in liquids; there is an acute risk of electric shock and short circuit. The appliance must also be switched off and disconnected from the mains before cleaning/maintenance
• When not in use, the appliance must be switched off and disconnected from the mains
• Damaged cables or plugs must not be used. These parts may only be replaced by qualified specialist personnel.
• Extension cables, adapters or multi-socket strips must not be used, as this can lead to overheating. There is an acute risk of fire
• In the event of a power failure or disconnection from the mains, wait at least 5 minutes before switching the appliance back on to avoid damage Refrigeration appliances
• After transport or when the appliance is moved, it must be left switched off for 24 hours before it may be switched on
• Make sure that sufficient air can be supplied to the appliance by keeping ventilation grilles and openings clear so that enough air can circulate
• The appliance must not be placed in the immediate vicinity of heat sources. Likewise, the appliance must not be located in damp rooms or in direct sunlight
• Ice cube machines are intended exclusively for making ice cubes. Other uses may cause damage and affect the warranty.
• The refrigerant used is a flammable and explosive gas. If the refrigerant circuit is damaged, the room must be well ventilated and open flames avoided.
• To prevent a flammable gas-air mixture from forming due to a leaking refrigeration circuit, the size of the room in which the appliance is installed depends on the amount of refrigerant used. The refrigerant quantity of your appliance is stated on the rating plate inside the housing.
• Do not place corrosive acids or alkalis in the appliance. Thermik
• The appliance must never be positioned near flammable materials or heat sources.
• A safety distance of at least 20 cm on all sides must be maintained.
• Only use the appliance with an earthed power connection and check the power cable regularly for damage.
• The appliance is not suitable for outdoor use or use in the rain.
• Surfaces can become hot during operation – use protective measures such as gloves.
• In the event of fire, never use water, but suitable extinguishing agents (e.g. C14)